:No.3, BEIDOU Road, Jinfeng Industrial. Zone, Zhangzhou, China.
:(86) - 13709339292,(86) - 13605088747
:(86) - 596 - 2613080 - 2001
Current Location : Home Page - Product Series - Distance Meter
WH1005 Ultrasonic Distance Meter with Laser Pointer
Distance Meter
Packaging Details

PACKING : Single blister
N.W: 7 KGS
G.W: 8 KGS
MEAS: 43*38*29.5CM

2019-06-28 17:12:26
Manual Download

The Ultrasonic Laser Distance Measurer is a handy device that allows you to quick and easy measure distances and volumes using laser and ultrasound 

Technology features

Laser pointer measures from 2 feet up to 50 feet (60cm up to 15 meters)
Easy-to-read LCD display
Built-in calculator for measuring areas and volumes
Adds and subtracts linear measurements, area, volume Memory function
Choose from M/Ft units
Tracking and validate modes
Operated by one piece of 9V battery (battery not included).
Accuracy 0.5%+1 digit(2-60ft)
Working frequency 40KHz
product size: 136*61*38mm (L x W x H)mm

Weight: 145g(no including battery)
Power suply:9V battery
Unit of measurement :feet or meters.
Frequency: 40 kHz (ultrasonic pickup)
Working temperature: 32 °F to 109.4 °F or 0℃ to 43℃
Class II laser product: output<1mw。
Wavelength: 650nm (nm =nanometer)

With laser point aiming
Foot/Meter function button
Auto stop: switches off if you do not press any key for 4 min.
Memory: allows you to measure and to store 3 different measures
Calculation of area and volume.
Addition and Subtraction function: allows you to add or subtract 2 measures.
Clearing of memory function: allow you to delete quickly all the measures stored.
Correction of errors: the distance measurer indicates that a distance measured is either too long, or too short.
Press READ to turn on the unit, the laser point light on, the distance betwwen the laser distance measurer and the point you measured apears.
To find the area and volume of a room, measure the length and press X/=,measure the width, then press X/=,then the square icon and the data of area appears, measure the height and press X/= the cubic icon and the data of volume appears.
The initial unit is metric, hold the SET key 3 second, the unit can switch between METRIC and IMPERIAL.
The laser distance meter turns itself off if no key is pressed within about 30 seconds.
Copyright (C) 2011 Zhangzhou Weihua Electronic Co., Ltd. All Rights Reserved.
Address:No.3, BEIDOU Road, Jinfeng Industrial. Zone, Zhangzhou, China. Postcode:363000
TEL: (86) - 13709339292,(86) - 13605088747 FAX: (86) - 596 - 2613080 - 2001 网站管理 QSystem